Rust, Welding and Numpty Questions

Chrisw8 said:

Oooooo......double posting

Click to expand...

exited!

well done !

Re-fitted interior bits....including new sound proofing made from 'closed cell' stuff.




gave bumper inside and end of Chassis, 2 coats bonda primer







does anyone know if bog standard evo stick contact adhesive will be ok to stick this bit down ??

Don't see why not. Glue it and put something heavy on it while it sets.

Cracking job
when I started reading this I felt for you, rust and holes everywhere
but you have done it another skill learned

Thanks greyhair,

It was a daunting task, and I should have scrapped it, but buying another one would have probably been just as bad. The motor/mechanics are all good, as I've got a shed load of receipts from the previous owner.......anything wrong and they took it straight to the garage, so hopefully I'll have no problems there.!!

I know the n/s front is almost as bad , but I know what I'm doing now, and hopefully it won't take as long to do next year.

.......... Then there's the rear to look at, leaky sunroofs ......lol

Just given the o/s of bumper 3 coats of rattle tin satin spray.
I got good coverage etc. but not being familiar with spraying........is that enough ?