RRC Exhaust

Davegilsenan · Mar 27, 2012

Hello, I hope someone can help.......I'm trying to fit a new exhaust to my classic - centre box, pipe and back box. The problem i can not get the rubber hangers to go over the brackets on the car or the exhaust. Any tips please??
Thanks

nick2303 · Mar 27, 2012

did my exhaust on friday... i struggled too...

i found lubrication helped, got em on car first then the nice new metal slid in easier with lube...

Davegilsenan · Mar 27, 2012

Cheers...what kind of lube worked for you?

nick2303 · Mar 27, 2012

just squirted em with a bit of wd40..

gettin the rubbers on the car was hardest bit. lube didnt do much good. but the new metal slid in nice and easy with a bit of wd40..

joe1972 · Mar 27, 2012

If WD40 isn't doing it for you, try a little moly grease.
....a little easing with a combination of levers/ larger screwdriver/ smaller pry bar also helps.

1992lse · Mar 28, 2012

undo the mountings from the body, slide the rubbers over easy, and then push up with knees and rebolt the mounts. so much easier

RRC Exhaust

Davegilsenan

Member

nick2303

Well-Known Member

Davegilsenan

Member

nick2303

Well-Known Member

joe1972

Well-Known Member

1992lse

New Member

Similar threads