RRC 1994 soft dash - cruise control pipes?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

peanuts01

Active Member
Posts
91
Location
Uttoxeter
Merry Christmas one and all (Ho Ho ............ Ho)
Yes, cruise control vacuum pipes, there are none! It has the vacuum pump and it has an actuator (I think) and there's a broken pipe coming out the bulkhead from what I assume from it's position is the switch on the brake pedal, but that's it. Manual tells me how to check if it's working but it can't without a vacuum feed. Any advice on where the pipes go/are attached to would be most welcome, cheers.
 
Merry Christmas one and all (Ho Ho ............ Ho)
Yes, cruise control vacuum pipes, there are none! It has the vacuum pump and it has an actuator (I think) and there's a broken pipe coming out the bulkhead from what I assume from it's position is the switch on the brake pedal, but that's it. Manual tells me how to check if it's working but it can't without a vacuum feed. Any advice on where the pipes go/are attached to would be most welcome, cheers.
There must be a vacuum take off on the inlet manifold, check around,sorry I cannot be more help.Merry Christmas to you as well.:D
 
Merry Christmas one and all (Ho Ho ............ Ho)
Yes, cruise control vacuum pipes, there are none! It has the vacuum pump and it has an actuator (I think) and there's a broken pipe coming out the bulkhead from what I assume from it's position is the switch on the brake pedal, but that's it. Manual tells me how to check if it's working but it can't without a vacuum feed. Any advice on where the pipes go/are attached to would be most welcome, cheers.
As u state you have the vac pump and actuator so ignore the previous post.
Some manuals do show the route of the vac pipe, the basics are... it starts from the pump and onwards, midway there’s a T piece which is used for a branch pipe to the actuator, the pipe continues then terminates at the combined vacuum dump valve - brake light switch... so thats about it for the hose, its an identical set up for the V8 D1.

I had to replace my discos vac hose a few year ago purchased from a supplier on eBay, inside diameter 4 or 5mm and take your pick on the colour :)
 
Back
Top