RR Classic clutch pedal return spring

teddykan · Sep 19, 2010

Hi folks,
I replaced both master and slave clutch cylinders on my 1989 RR Classic as both cylinders were leaking badly. Whilst fiddling about refitting the master cylinder pushrod onto the clutch pedal arm I noticed there's a return spring on this arm. It's not fixed to anything so the pedal arm is not returning on this spring.

Question: how do I get this spring to return the clutch pedal to the 'up' position?

Thanks
teddykan

teddykan · Sep 23, 2010

I tried to get at the clutch pedal box, but it wouldn't budge. It got too fiddly and I decided to give up on it. The clutch does return to the full up position but only does so because of the spring in the clutch master cylinder.

Shame. Does anyone know how to get the pedal box out?

Terra

kds · Sep 24, 2010

Had same thing on my 89 classic (might have had on 75 classic before it as well but cant remember) did fit new spring but havent a clue how did it now but do know never took pedal box out, think had to take pedal mounting bolt out somehow.

RR Classic clutch pedal return spring

teddykan

New Member

teddykan

New Member

Attachments

kds

Well-Known Member

Similar threads