rover 200 ecu to freelander
- Thread starter bandit600
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,310
- Location
- Embasinga stocæ
which hippoo yu got?
well at the moment its a 1.8 k series but i'm attempting to put a rover L series in it.
every time i get something sorted someone tells me different
so the ecu i have is the one off the rover L series which is the same plug as the petrol one.
dean
clutchdust
Well-Known Member
- Posts
- 1,335
- Location
- south wales
If you're fitting the L series engine, you'll need the ecu and wiring from the L series, I would think the rover and landrover ecu's would be the same, they're all rover after all, plugs might be the same but make sure all the pins are in the right places.
just found out that rovers used bosch edc sm007 ecu's from 95 on and freebies used them upto 2001 so should be the same
i have the rover engine, loom, alarm control unit and fobs so heres hoping lol
i am assuming that all the bosch ecu's will be the same from factory and programmed by rover/landrover for the bits to make it compatable with all working on their cars
any ideas on that???
chhers dean
cashybai
New Member
- Posts
- 662
- Location
- Roootland, t'midlands
Deano,
Me local non-franchise landy bods know of two bods now who've bought rover diseasels and done engine swops on early fl's. The bits are mostly the same bar the badging. I'm running an ex-820d fuel pump on me xedi, as the Landy bit was gonna be shedloads....
Me local non-franchise landy bods know of two bods now who've bought rover diseasels and done engine swops on early fl's. The bits are mostly the same bar the badging. I'm running an ex-820d fuel pump on me xedi, as the Landy bit was gonna be shedloads....
cashybai
New Member
- Posts
- 662
- Location
- Roootland, t'midlands
I replied today Deano...........
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
So Did clutchy!
and now i have i suppose
If you want to stop gettin emails for each reply ,
try goin to "thread tools" and click unsubscribe
and now i have i suppose
If you want to stop gettin emails for each reply ,
try goin to "thread tools" and click unsubscribe
Deano,
Me local non-franchise landy bods know of two bods now who've bought rover diseasels and done engine swops on early fl's. The bits are mostly the same bar the badging. I'm running an ex-820d fuel pump on me xedi, as the Landy bit was gonna be shedloads....
thats what i thought about being the same but keep getting told diff lol
the way its going i will have to just do it and hope nothing catches fire lol
who is the local place maybe if i call them they can give me some advice???
dean
Deano,
Me local non-franchise landy bods know of two bods now who've bought rover diseasels and done engine swops on early fl's. The bits are mostly the same bar the badging. I'm running an ex-820d fuel pump on me xedi, as the Landy bit was gonna be shedloads....
neil
what year is your freebie? where are you located???
if not that far can i take a look at you freebie???
or can you post pics of your ecu unit?
cheers dean
cashybai
New Member
- Posts
- 662
- Location
- Roootland, t'midlands
Bandit,
I'm just on the north side of Rutland water if that's any good. Me ECU is bog standard, me only bit ex rover so far is the fuel pump, and me landy is a '98 R Xedi. The Bods I'm talking about are 'Footloose 4X4' in peterborough, 01780 784781 for info, tho Nene Overland, again in peterborough may also be worth a bell, though I don't have their number to hand. Give Mad hat Man a pm, he may be able to popst the relevant piccy out the RAVE disc if he's about.
You there Hatters?
Regards,
I'm just on the north side of Rutland water if that's any good. Me ECU is bog standard, me only bit ex rover so far is the fuel pump, and me landy is a '98 R Xedi. The Bods I'm talking about are 'Footloose 4X4' in peterborough, 01780 784781 for info, tho Nene Overland, again in peterborough may also be worth a bell, though I don't have their number to hand. Give Mad hat Man a pm, he may be able to popst the relevant piccy out the RAVE disc if he's about.
You there Hatters?
Regards,
Similar threads
Freelander 2 (LR2)
Freelander 2 Manual to Auto transmission conversion
