ravler2009
New Member
- Posts
- 1
hi can anyone tell me how to rotate the axel on a series 3 to get higher grond clerance? thanks
rotate axel
- Thread starter ravler2009
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
No.
oil dripper
Well-Known Member
- Posts
- 5,659
- Location
- Here i think
dunt marra where yer put yer axle it,ll still av the same ground clearance until yer put bigger tyres onnit
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
It's gonna get more ground clearance on the back of an AA lorry
byway-basher
New Member
- Posts
- 125
- Location
- Suffolk
Rotating the axle will make the fastest reversing series truck in town
But I suspect the fact the front diff is off-centre could create some serious problems
But I suspect the fact the front diff is off-centre could create some serious problems
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
Rotate the whole vehicle 180 deg (including the rear axle) and you will find that you have ground clearance between the ground and the diff of about 5 and a half feet.
andyb66
Well-Known Member
- Posts
- 1,795
- Location
- Middle of Salisbury Plain, Wiltshire
I assume you mean a 'spring over' conversion. To be honest, really not worth the bother.
Fit one tonne shackles and hangers and 9.00x16 tyres
Teflon
New Member
- Posts
- 683
I assume you mean a 'spring over' conversion. To be honest, really not worth the bother.
Fit one tonne shackles and hangers and 9.00x16 tyres
There you go getting all perverse again, giving a 'sensible' answer to a 'silly' question!
Gowarn, I may as well, join you....
Go Use the SEARCH facility on the SERIES forum..... this has been asked and answered hundreds and hundreds of times, probably even within the memory span of My Goldfish!
