Rock & Tree Sliders
- Thread starter Cirrus
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
pete at moonraker 4x4 in Salisbury makes and fits them
robint
Well-Known Member
- Posts
- 7,057
Trailpug
New Member
- Posts
- 419
- Location
- Norwich, Norfolk
Got mine from this guy cannot complain really nice guy as well!
Richmond Shot Blasting | Rock Tree Sliders Landrover | Tank Guards 4x4
Richmond Shot Blasting | Rock Tree Sliders Landrover | Tank Guards 4x4
terratology
New Member
- Posts
- 55
- Location
- Bristol (south)
If your having your sills cut out why don't you just have them replaced with box section? Loads cheaper than buying rock sliders and do the same thing!
True, that was the plan but I have lifted the disco and the mrs can't get in without the current side steps so when they go she needs a step up :hysterically_laughi
Plus handy for off-roading
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
pete will cut out sills and replace with box section,the sliders are then welded to them
loads better than one size fits all of the shelf
loads better than one size fits all of the shelf
Found a guy who is fabricating me a set of rock sliders and tree sliders and will cut out existing sills and weld in place. He is a landrover buff and a professional welder. However, the new sills etc will not be painted. He advised that I use red oxide and then paint over - not hammerite. What is the best paint to use?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
whatever paint you use it will wear off over time where u get in and out of the landrover anyway
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
will split and peel off in short order. First chip from stones or what every, water gets behind it and starts to peel
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
just hammerite it and repaint as req tis what most peeps do...works for me anorl
terratology
New Member
- Posts
- 55
- Location
- Bristol (south)
Hammerite from me too, but don't use red oxide first though as Hammerite doesn't mix well with it. Oh and have you thought about getting a taller mrs?
terratology
New Member
- Posts
- 55
- Location
- Bristol (south)
If she reads that you won't be trying anymore!!
ahahahahahahahah Hurray!
Similar threads
