ride quality

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

frosty2008

New Member
Posts
95
Location
Tenterden, Kent
Hi guys,

Ive noticed for a while that i think there is something up with the suspension on my p38 1998 4ltr auto

the ride is very wollowy (spelling???) and not at all tight going over pot holes and round corners etc. i was thinking the shocks are knackered but is there something else i should be looking at? the EAS seems to be fine. it raises and lowers as it should (as far as i can tell)

cheers

frosty
 
frosty2008 said:
Hi guys,

Ive noticed for a while that i think there is something up with the suspension on my p38 1998 4ltr auto

the ride is very wollowy (spelling???) and not at all tight going over pot holes and round corners etc. i was thinking the shocks are knackered but is there something else i should be looking at? the EAS seems to be fine. it raises and lowers as it should (as far as i can tell)

cheers

frosty
Click to expand...

Can only be shockers.
 
Sorry cant see it in rave manual, its not difficult though, jack up car, put axel stands on the chasis, remove wheels. theres nut & bolt on 1 end and the thread is on the shock at the other, losen both first then undo and remove. Put new in, Job Done. Always pays to spray everything with wd40 before starting
 
You must log in or register to reply here.

Similar threads

J
D1 suspension - improve ride quality?
Replies
9
Views
1K
Jalfrezi
J
B
Which shocks?
Replies
14
Views
828
BigJessie
B
S
suspension oddity
Replies
6
Views
695
Wildefalcon
W
B
P38A 1996 4.6 Auto HSE. driver side bags not inflating after valve block rebuild.
Replies
17
Views
1K
nigelbb
N
G
Toyo Open Country AT3?
Replies
5
Views
622
kevstar
kevstar
Back
Top