Reservoir to servo pump pipe

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mario110

Mario110

Active Member
Posts
105
Location
Germany
Hi,
is it possible to change the pipe (QEH102570) DIY on my TD5 110? I cannot find any instructions in the workshop manual...
Best Mario
 
Yes, it's very straight forward, if a little messy.
  1. Drain old power steering fluid
  2. remove old hydraulic hose
  3. Install new hydraulic hose and tighten correctly
  4. fill up PAS steering box and reservoir with new clean PAS fluid
  5. bleed system as per manual - it's worth routing out a PAS fluid bleeding video on YouTube to see how this is done
  6. test drive...and re-bleed if necessary
 
Ok, sounds good. I read somewhere that the air conditioning compressor is in the way and has to be removed...
 
You must log in or register to reply here.

Similar threads

M
Pump to the steering box pipe
Replies
4
Views
395
mma59
M
Clayrr
TD5 OIL
Replies
2
Views
327
1988smithy
1988smithy
RustyDefender
Brake servo upgrade
Replies
16
Views
937
RustyDefender
RustyDefender
S
Whistle noise from tail pipe
Replies
3
Views
360
lynall
L
S
Starting issue. Fuel system bleed
Replies
8
Views
973
sjr202
S
Back
Top