Replacing the Heater/Water Control Valve.

Jamie Tyldesley · Aug 8, 2018

I would be very grateful if someone could suggest the best way to remove the heater/water control valve on my Series III.

Best, Jamie

Mingus · Aug 8, 2018

Erm....with a spanner. Seriously though....if its the one at the front of the block, remove cables then remove valve. bit of coolant will come out when you do it.

rob1miles · Aug 8, 2018

Do you mean its siezed in?

Jamie Tyldesley · Aug 8, 2018

rob1miles said:
Do you mean its siezed in?

Think so

Jamie Tyldesley · Aug 8, 2018

I’m trying to turn this anti-clockwise with a spanner. Is this wrong?

Jamie Tyldesley · Aug 8, 2018

Mingus said:
Erm....with a spanner. Seriously though....if its the one at the front of the block, remove cables then remove valve. bit of coolant will come out when you do it.

Thanks for the help; it isn’t behind the block and I’ve already disconnected hoses and cables

jamesmartin · Aug 8, 2018

Jamie Tyldesley said:
I’m trying to turn this anti-clockwise with a spanner. Is this wrong?View attachment 155194

thats right but they can be tight and ali valve into that tube even tighter

Jamie Tyldesley · Aug 8, 2018

All fixed! Thanks for the help

Replacing the Heater/Water Control Valve.

Jamie Tyldesley

Member

Mingus

Active Member

rob1miles

Well-Known Member

Jamie Tyldesley

Member

Jamie Tyldesley

Member

Jamie Tyldesley

Member

jamesmartin

Well-Known Member

Jamie Tyldesley

Member

Similar threads