storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
When i replace the lift pump on a 200tdi do i need to make sure the cam is on the highest point or can i just put the new lift pump on? 
replacing lift pump
- Thread starter storm99
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
m35reo
New Member
- Posts
- 449
- Location
- dolgellau, gwynedd
no mate just wack it on, the arm will just compress to where it wants to be as you tighten it up. just get a bolt in as soon as you can then that will help hold it as you get other one in.
m35reo
New Member
- Posts
- 449
- Location
- dolgellau, gwynedd
yes sorry , like fanatic said make sure it aint under cam! i tend to lean the front of the pump down and bring it up and in. did that make sense??
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Yep, made sense to me, cheers.
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
It's nigh on impossible to get the arm under the cam, if you do manage it, you won't be able to do up the bolts, so if it's being a pain to align with the holes, then pull it back out and give it a wiggle.
Similar threads
