Replacing all cruise control vac pipes

D

Daveyboy999

New Member

Posts

11

Location

Rochdale

• May 13, 2010

• #1

Hi
Had some pointers last week on my 1997 3.9 cruise control probs and it is the vac pipes that are fooked. I've bought a lenth of new pipe a straight and a tee peice conector. I know that the vac pump is under the the jack storage and that about it, could somebody please give me a detailed talkthru' how to complete the repair. (i've downloaded the RAVE manual but not detailed enough on this prob for a numpt like me) Does the pipework go to the control unit under the dash. I'm going to try and fix it today
Thanks in advance
Dave

 

Last edited: May 13, 2010

discool

Well-Known Member

Posts

13,628

Location

Sector 12 in Kent, The Garden of England

• May 13, 2010

• #2

No the only place the pipe goes to is the brake peddle switch if u have an auto and also the clutch peddle if a manual.
So from the pump to the T piece behind the washer bottle then to the throttle servo and the peddle/s

 

D

Daveyboy999

New Member

Posts

11

Location

Rochdale

• May 13, 2010

• #3

Thanks Discool
What route does the peddal pipe take
Dave

 

discool

Well-Known Member

Posts

13,628

Location

Sector 12 in Kent, The Garden of England

• May 13, 2010

• #4

Daveyboy999 said:

Thanks Discool
What route does the peddal pipe take
Dave

Click to expand...

It passes through a hole in the engine bay bulk head to the right if the throttal cable

 

D

Daveyboy999

New Member

Posts

11

Location

Rochdale

• May 13, 2010

• #5

I've done all the pipes but noticed the rubber bellows on the actuator is also fooked and got holes in it so need a replacement. Is anybody breaking one or know of one going a right money
Thanks Dave