replacement gear selector trim for auto

gR@HaM · Nov 12, 2013

Does anyone know whether it's possible to buy just the 2 strips of trim that illuminate 1 2 3 D N R P, mine have worn away and it looks ****e when lit up.
Here's the whole replacement unit but I only need the plastic strips. .
BTR9926LNF AUTOMATIC ILLUMINATION UNIT | Discovery: Discovery 1 1989-1998: Interior: Trim | shop | www.lrseries.com

Cheers

gR@HaM · Nov 14, 2013

Anyone??

Georgey Dee · Nov 14, 2013

I could do with the two strips too.

Mark L · Nov 14, 2013

I looked into this a while ago as mine is the same.

Entire unit is the only option, I'm afraid.

gR@HaM · Nov 14, 2013

Boo, there's probably no point going second hand either

Mark L · Nov 14, 2013

Get yourself a fine paint brush, a steady hand and hold your breath - fill in the gaps.

gR@HaM · Nov 14, 2013

I'm actually thinking of doing that!!

discool · Nov 14, 2013

Take the bulbs out, unless you need to look at the selector.

StuRox · Nov 15, 2013

I had the same problem, as mine never had any when I bought it.

After hours of searching I came to the same result as above that you cannot buy them, so I made my own with the plastic you can print on, took a few attempts to get everything lined up, but works a treat now

Muddygamekeeper · Nov 20, 2013

StuRox said:
I had the same problem, as mine never had any when I bought it.

After hours of searching I came to the same result as above that you cannot buy them, so I made my own with the plastic you can print on, took a few attempts to get everything lined up, but works a treat now

Links to plastic you can print on?

(Ps I found the thread!)

discool · Nov 20, 2013

Muddygamekeeper said:
Links to plastic you can print on?

(Ps I found the thread!)

All the firms that do printer supplies have this film even PC World.

We used the stuff when doing over-head presentations but not so much now that we have 'power point' on our laptops and projectors.
Better still take the old one out and get a screen printer or similar to make a few up they would sell like hot cakes on e-bay at a fiver a time.

gR@HaM · Nov 20, 2013

PHP:

Muddygamekeeper said:
Links to plastic you can print on?

(Ps I found the thread!)

give me a nod when you've had the first lot run off and I'll pm my address

replacement gear selector trim for auto

gR@HaM

Well-Known Member

gR@HaM

Well-Known Member

Georgey Dee

Member

Mark L

Well-Known Member

gR@HaM

Well-Known Member

Mark L

Well-Known Member

gR@HaM

Well-Known Member

discool

Well-Known Member

StuRox

Well-Known Member

Muddygamekeeper

Member

discool

Well-Known Member

gR@HaM

Well-Known Member

Similar threads