- Posts
- 58,170
- Location
- Preston Lancs.
Torque as mentioned earlier is 10 Nm or 7 lb ft.
P38A Replace water pump
- Thread starter Salisbury Nick
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Torque as mentioned earlier is 10 Nm or 7 lb ft.
Datatek
Well-Known Member
- Posts
- 43,958
- Location
- Near Poitiers SW France
The pump is sealed with an O ring so Hylomar is not really needed IMO.
- Posts
- 58,170
- Location
- Preston Lancs.
Ok each to their own. But better safe than sorry.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,264
- Location
- Trapped inside my head @ LZ asylum
You want pump in there for good.
Something that will fit around it and a wallop left, don’t need proper spanner just be careful it doesn’t slip and go through the rad.
525 has same M51, thats what my old starter came off. They threw them in loads of things even Omegas, there few variations though but you’ll know if it’s same one from quick look at what’s bolted to it
Something that will fit around it and a wallop left, don’t need proper spanner just be careful it doesn’t slip and go through the rad.
525 has same M51, thats what my old starter came off. They threw them in loads of things even Omegas, there few variations though but you’ll know if it’s same one from quick look at what’s bolted to it
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
Yes, 525TDS or the Omega TD are the common ones. Some even had the 994 pump. Generally regarded as the most reliable engine BMW ever made, although slightly less so after Land Rover tinkered with it.
dubbleRR
Well-Known Member
- Posts
- 1,011
- Location
- highlands of Scotland
If you feeling brave ,,,Change the thermostat when your in there .
Datatek
Well-Known Member
- Posts
- 43,958
- Location
- Near Poitiers SW France
Since many new ones are faulty, might be better to not fix what aint broken.If you feeling brave ,,,Change the thermostat when your in there .
RangeRoller dt
Well-Sprung Member
- Posts
- 14,264
- Location
- Trapped inside my head @ LZ asylum
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
See price of OE thermostat first
What’s a 944 pump???
Last 3 digits of the serial number on the FIP. Only the 994 was fitted to the p38. Others do weird things.
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
See price of OE thermostat first
What’s a 944 pump???
I just used the OEM stat from Island. Cost about £30 which wasn't bad.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,264
- Location
- Trapped inside my head @ LZ asylum
I had a £9 one , against Wammers warnings, and drilled a hole in it. Old one was acting like there wasn’t one in there but it was a bmw one.
Works well but it is chancing it. Now I know the symptoms of a dodgy stat I can change it if and when it needs it. If it jams il just take it out for the interim.
Works well but it is chancing it. Now I know the symptoms of a dodgy stat I can change it if and when it needs it. If it jams il just take it out for the interim.
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
Hi Guys - been a while. Took Christmas off out of frustration.
Bloody F****** B******* Bloody S***** F******* water pump!
Norwegian matey on Youtube shows you how to gently tap a 32mm spanner to release the fan nut - and on his video it just comes loose. Not in my world!
Spent literally days tapping, then whacking the spanner with a lump hammer, tightened fan belt to lock the fan, even bought the special tool to hold the pump pulley in place so that you can get proper traction on the nut - all to no avail, and I'm no stranger to using a hammer. Went through two 32mm spanners, (spanner jaws opened and started to round the nut). Eventually - had to cut it off!
Now the fan is off I'm eventually starting to actually replace the pump.
Bloody F****** B******* Bloody S***** F******* water pump!
Norwegian matey on Youtube shows you how to gently tap a 32mm spanner to release the fan nut - and on his video it just comes loose. Not in my world!
Spent literally days tapping, then whacking the spanner with a lump hammer, tightened fan belt to lock the fan, even bought the special tool to hold the pump pulley in place so that you can get proper traction on the nut - all to no avail, and I'm no stranger to using a hammer. Went through two 32mm spanners, (spanner jaws opened and started to round the nut). Eventually - had to cut it off!
Now the fan is off I'm eventually starting to actually replace the pump.
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
How right you were.
- Posts
- 12,146
- Location
- Sud ouest France !
Sling the viscous fan and do the electric fan mod.
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
Hi Guys - been a while. Took Christmas off out of frustration.
Bloody F****** B******* Bloody S***** F******* water pump!
Norwegian matey on Youtube shows you how to gently tap a 32mm spanner to release the fan nut - and on his video it just comes loose. Not in my world!
Spent literally days tapping, then whacking the spanner with a lump hammer, tightened fan belt to lock the fan, even bought the special tool to hold the pump pulley in place so that you can get proper traction on the nut - all to no avail, and I'm no stranger to using a hammer. Went through two 32mm spanners, (spanner jaws opened and started to round the nut). Eventually - had to cut it off!
Now the fan is off I'm eventually starting to actually replace the pump.
We've been there. Same with mine the first time. Bent the holding tool and spanner. No need to do anything other than nip it up when you put it back.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,264
- Location
- Trapped inside my head @ LZ asylum
New viscous fan is silly money, AC fan mod may be best option for you now. I had to use big grips and strong spanner first time, once it’s off little coppaslip and itl be okay from there on
RangeRoller dt
Well-Sprung Member
- Posts
- 14,264
- Location
- Trapped inside my head @ LZ asylum
Think it was you that had the pic of your rad full of clay so I’m not terribly surprised
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
Think it was you that had the pic of your rad full of clay so I’m not terribly surprised
Me? Yes, been there. Bakes on like ceramic.
Oh, you mean Mark? Think he's been there too! Hence his snazzy bespoke radiator.
Or Nick? If he's been off-roading on Salisbury plain he'll be well acquainted with mud plastering everything up!
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
yup. That chalky lime mud, really sticky and bakes hard. Basically a wet day out on Salisbury Plain is like driving your car through successive tanks of sloppy lime mortar. You drive through one and get your radiator and everything else submerged to 20’’ in lime mortar, drive for a mile or two in the dry so that it can really set hard, then drive through another one, repeat all day until there is more mud baked into every radiator grille, every bearing, brakes and pads, discs, vent and drain hole - and the drive home to allow it time to set properly.
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
How does the fan mod work? The air con does not work any way and I have been wondering about removing the air con rad altogether- is that feasible?
Is there another mod for an electric fan instead of the viscous one? At the moment I think I can re-use the existing viscous fan as the nut was not damaged when we cut through the old water pump spindle, however, they are a pain and now is the time to make the mod if i’m going to at all.
