Red and white springs

Just checked the h/d spring set I bought from John Craddock and found 2 red
and white coded springs and 2 green coded springs, closer inspection on JC's
website does indicate this to be a h/d set for R/R.

I'm fitting these to a 90 for extra lift now I've fitted a heavier diesel
engine as apposed to the V8 I had in previous.

I was advised to put red and whites on, should they be these all round?
Should I have just bought 4 red and whites?

I'm a bit confused (not hard, bloody red wine) but if anyone can shed any
light on the matter it would be appreciated before I remove another layer of
skin from knuckles.

Regards, Roy.

On or around Fri, 21 Jan 2005 20:52:41 +0000 (UTC), "LR90" <[email protected]>
enlightened us thusly:

>Just checked the h/d spring set I bought from John Craddock and found 2 red
>and white coded springs and 2 green coded springs, closer inspection on JC's
>website does indicate this to be a h/d set for R/R.
>

green/green are RR diesel front, and there's another set which are even more
HD - they might be the red/whites.

when I was looking for springs for the disco, the HD90 ones were about the
tallest/strongest I could find in the standard list, but still were about an
inch shorter than I wanted. I forget what colour they were.


--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
"Festina Lente" (Hasten slowly) Suetonius (c.70-c.140) Augustus, 25

Thanks Austin, but after considerable muscle excercise I have, with the help
of the JC staff fitted red n white all round. Seems to be a bit cockeyed up
front at mo but I'll keep you posted but V busy this week @ NEC dooin
exhibition. Cheers Roy.

"LR90" <[email protected]> wrote in message
news:[email protected]...
> Just checked the h/d spring set I bought from John Craddock and found 2
> red and white coded springs and 2 green coded springs, closer inspection
> on JC's website does indicate this to be a h/d set for R/R.
>
> I'm fitting these to a 90 for extra lift now I've fitted a heavier diesel
> engine as apposed to the V8 I had in previous.
>
> I was advised to put red and whites on, should they be these all round?
> Should I have just bought 4 red and whites?
>
> I'm a bit confused (not hard, bloody red wine) but if anyone can shed any
> light on the matter it would be appreciated before I remove another layer
> of skin from knuckles.
>
> Regards, Roy.
>
>