Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Can anyone recommend a reliable place where I can buy a good quality O ring set for the Bosch FIP on the P38?
Thanks
Thanks
P38A Recomedations please
- Thread starter Datatek
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
they say they do original parts.. https://www.eurodiesel.com/en/category/o-rings
- Posts
- 12,660
- Location
- Sud ouest France !
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Thanks, have you used that supplier? I ask because there is so much fake stuff on Ebay and it's a job i only want to do once on each car.
- Posts
- 12,660
- Location
- Sud ouest France !
I did look at the one I had bought and it was in February 2017 and I couldn't get back onto the annonce.... I'll try on the computer.
ovalandrover
Well-Known Member
- Posts
- 1,610
https://www.ebay.co.uk/itm/Land-Rov...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
have bought this kit and it works well but ihave also bought one from poland for under £10 pound and it works jjust as wellit usually the top gasketsthat leak. i connot find the listing for the polihs one anymore asi bought it in july 2018
have bought this kit and it works well but ihave also bought one from poland for under £10 pound and it works jjust as wellit usually the top gasketsthat leak. i connot find the listing for the polihs one anymore asi bought it in july 2018
- Posts
- 33,934
- Location
- North Shropshire
Last time i needed an unusual sized o-ring i bought one from an online dedicated supplier, i don't recall which one do doesn't really help!
My particular application was fuel pump seal in bottom of a motorcycle fuel tank
My particular application was fuel pump seal in bottom of a motorcycle fuel tank
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Thanks to all who responded, I have followed Mark's advice and ordered a set.
