Rear work lamp setup?

Dont worry its not another thread about wiring in a rear work lamp, i know u need a realy and a fuse! So now thats out the way, i just wondered inf anyone knows where you can get a rear work lamp that clamps onto the roof sill at the rear of the landy? Whilst i am here what do you folks recon...one single round rear work lamp (mounted to the side seems to be popular) one single lamp mounted in the middle, or two one either side? Any pics of where yours are mounted would be spot on. cheers

depends on what you want it for really. 2 lamps is a lot!!

put in pass side otherwise the door casts a shadow.

get a cb gutter mount and fix it to that.

get a work lamp with a switch and tricky wiring not needed...

Funnily enough I fitted one last night. It came from Rebel and it's made by Lucas. I bought this one rather the things you get off eBay, as the bracket is a lot more substantial. Anyway - I've fitted it high up on the rear of the car, on the passenger side.

As above...... if your rear wash wipe is defunct you can use that to fit a lamp in the centre but ideal is pass side. You will have to run wiring into the vehicle and need a hole so a couple of extra ones to make it secure? Your choice.
Ebay is a reasonable place to look for what you want..... pics of pass side and centre rear lamps attached.