Hi All,
I've been searching Google for days and still can't get a definitive answer I've found 2 replacement Part numbers for this but I'm not 100% sure which one I need its either the STC3316 or DLB101640. Now according to most sites the STC3316 only goes up to MA vins (mine is TA) from there some say DLB101640 is for MA onward but some sites say it is for the Disco 2 only and some sites say the STC3316 is for MA onward too so as you can guess I'm quite confused and as there is nearly £100 difference in the cost I'm hoping its the DLB101640 as a lot of sites quote is for the Disco 1 MA onward. If someone can help I'd be grateful.
Also the one I've taken out doesn't seem to be stamped with a part number I can see but I'm not sure where to look, I took the back off and think its completely gone the worm gear still goes round unfortunately all the time (i think its trying to return to the off/down position) but can't move the wiper arm because from the looks of it the nylon gear that moves the wiper has had most of its teeth ground down to a U shape and won't mesh with the worm gear anymore
Thanks,
Ash
I've been searching Google for days and still can't get a definitive answer I've found 2 replacement Part numbers for this but I'm not 100% sure which one I need its either the STC3316 or DLB101640. Now according to most sites the STC3316 only goes up to MA vins (mine is TA) from there some say DLB101640 is for MA onward but some sites say it is for the Disco 2 only and some sites say the STC3316 is for MA onward too so as you can guess I'm quite confused and as there is nearly £100 difference in the cost I'm hoping its the DLB101640 as a lot of sites quote is for the Disco 1 MA onward. If someone can help I'd be grateful.
Also the one I've taken out doesn't seem to be stamped with a part number I can see but I'm not sure where to look, I took the back off and think its completely gone the worm gear still goes round unfortunately all the time (i think its trying to return to the off/down position) but can't move the wiper arm because from the looks of it the nylon gear that moves the wiper has had most of its teeth ground down to a U shape and won't mesh with the worm gear anymore
Thanks,
Ash