Rear tub seal to seat box?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

fergus77

New Member
Posts
23
Location
Cornwall
Hey all, newbie to the forum so go easy on me;)

Been stripping the rear end of my 90 to do some chassis repairs, and when i removed the tub from the seat box there was a seal running the length of it. Is this seal a special part or is it just seam sealer or Hylomar applied before rebuilding?

Also, are there special seals for the roof to windscreen frame etc or will a sealant do the same job?
 
there's a chap that does all the landy and classic car shows and sells nowt but seals and ruber/neophrene profiles and seals. Can't remember his name but google will find him or someone doing the same. Also LRseries or similar will have the proper seals.
 
fergus77 said:
cheers for the info dude,

So i couldn't use hylomar or something similar?
Click to expand...


Ya could RTV silicone is the best way to go if ya wanna use sealant. or go to glazing suppliers Solaglas is good and get some glazing tape it's available in various widths and thicknesses and is double sided and sticks like **** to a blanket. It's designed to stick glass in wood or metal frames bit like putty on a roll. lovely stuff.
 
The correct stuff is available in strips from LR but personally I used a butyl sealant in a tube with excellent results.
 
You must log in or register to reply here.

Similar threads

meego
Roof to Windscreen Frame Seal
Replies
4
Views
484
Tirran
Tirran
AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
759
AH-4x4
AH-4x4
T
Rear spring stuck in upper seat
Replies
14
Views
793
Twinnie
T
E
Freelander 1 Fitting new crankshaft rear oil seal and oil sump gasket to L series
Replies
1
Views
567
GrumpyGel
GrumpyGel
RustyDefender
Rear quarter glass
Replies
8
Views
997
110Matty
1
Back
Top