Roof to Windscreen Frame Seal
- Thread starter meego
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mine had the same. i belive it was calking like they used in the gutters or dumdum depending on year from the factory. i guess most will be some sort of silicone by now to solve water ingress.
I replaced the seal mainly as an anti rattle and then used tiger seal along the windscreen join and around the awkward coners.
I replaced the seal mainly as an anti rattle and then used tiger seal along the windscreen join and around the awkward coners.
I’ve decided not to split this joint. I can just tilt the roof up enough to renew the bottom bulkhead seal. I was thinking of removing the frame to paint it with the windscreen out, but it’s too much of a faff and I’ll do it in situ. Cheers for the replies 
Tirran
Well-Known Member
- Posts
- 251
- Location
- South Lanarkshire
There are two seals between the roof and the screen frame. I split mine to paint the screen frame, replaced the seals and its been ok since then.
More leaks are due to a failed glass seal which isn’t really that difficult to replace if you warm it first.
More leaks are due to a failed glass seal which isn’t really that difficult to replace if you warm it first.
