frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
Ditto 
Rear trailing arm to chassis powerflex polybush
- Thread starter Officerdibble
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Did they give any sort of explanation?
Good result btw
Good result btw
Officerdibble
Member
- Posts
- 70
- Location
- Northwich
Nope ,
Just said the metal bush is the correct length and we will send you new poly bushes , interested to see what pops through the letter box as the original bushes where 2.5mm u/size and you would think the manufacturing process would be injection moulding which produces tight tolerances...
Officerdibble
Member
- Posts
- 70
- Location
- Northwich
Some new bushes dropped through the letter box on Friday one set spot on one set measuring 0.7mm under ah well...
I'll machine the steel bush down to suit .
So nowt else of them
I'll machine the steel bush down to suit .
So nowt else of them
Similar threads
