Rear spot light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

harleyboy

New Member
Posts
56
Hi,

I need to put a spotlight on the rear of my disco as the windows are tinted and in the dark I can see bugger all behind when reversing. however, I have no electrical skills whatsoever.
Can anyone tell me in lay mans terms (read thick as mince) how to wire one in?

Thanks in advance

Andy
 
Fitting a spotlight to the existing reverse light wiring, let's hope the fuse blows before the reverse switch and/or wiring melts.

Run a seperate fused circuit from the battery switched via a suitable power rated illuminated switch on the dash and use as required, afterall you won't want to use the spotlamp during the day will you.
And if you must fit an additional lamp use a foglight it has a better spread of light, unless you want to see 500m plus into the distance.:D
 
Fitting a spotlight to the existing reverse light wiring, let's hope the fuse blows before the reverse switch and/or wiring melts.

Run a seperate fused circuit from the battery switched via a suitable power rated illuminated switch on the dash and use as required, afterall you won't want to use the spotlamp during the day will you.
And if you must fit an additional lamp use a foglight it has a better spread of light, unless you want to see 500m plus into the distance.:D

ave got 2 rear mounted spots connected, via a relay, to me reverse lights

it's fab being able to see where ya going
 
Back
Top