Matty2range
New Member
- Posts
- 2
- Location
- UK
Hello All,
Looking for a bit of info on the rear prop shafts for the P38's...
As far as i'm aware the front prop is the same for all models (correct me if i'm wrong).
I was wondering if anyone knew the dimensions / could measure their prop from the mounting flange on the non slider end to the opposite end of the shaft excluding the slider. Alternatively if anyone has a prop kicking about that isn't fitted to a vehicle if they could measure the prop flange to flange with the slider pushed all the way in that would be a big help!
I'm basically looking for the difference between the prop for the V8's and the prop for the TD6.
Any help is much appreciated!
Looking for a bit of info on the rear prop shafts for the P38's...
As far as i'm aware the front prop is the same for all models (correct me if i'm wrong).
I was wondering if anyone knew the dimensions / could measure their prop from the mounting flange on the non slider end to the opposite end of the shaft excluding the slider. Alternatively if anyone has a prop kicking about that isn't fitted to a vehicle if they could measure the prop flange to flange with the slider pushed all the way in that would be a big help!
I'm basically looking for the difference between the prop for the V8's and the prop for the TD6.
Any help is much appreciated!
