Disco 2 Rear prop rubber coupling question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
berg450

berg450

Well-Known Member
Posts
665
Location
Hungary
As i had to remove the rear prop for diff seal change i have ordered rubber coupling set for the prop as well. The set also includes a bush which seems a bit different. Should i try to change it as well or just leave it and change only the rubber coupling?
I have tried to attach photo but it does not work..
 
Do you mean the spigot bush? If so, its a swine to remove. Took me about an hr with a cold chisel. Id leave it well alone unless it looks knackered. Is it a genuine donut or decent quality? The cheap one i fitted never balanced right. Fit bolts exactly as they were on refitting it
 
GKN one should be good. If you can find a broom handle or something that fits inside the spigot perfectly, you can use grease to hydraulically press it back out. It didnt work for me though! Best of luck
 
ronsealdeath said:
GKN one should be good. If you can find a broom handle or something that fits inside the spigot perfectly, you can use grease to hydraulically press it back out. It didnt work for me though! Best of luck
Click to expand...
I think I will leave it as it is. It looks something completely different what I have in the prop. The one I got in the GKN set has rubber inside, mine has a metal (maybe copper) sleeve and rubber is between this and the outside wall of the spigot. The outside diameter is also different (mine is bigger).
 
https://www.johncraddockltd.co.uk/tvf100010-g-propshaft-coupling-kit-complete-gknhardy-spicer.html

This one ?

11168-tvf100010g-coupling-kit-complete-gknhardy-spicer.jpg
 
Yes, this is what I got, but I have different in the prop. See photo.
 

Attachments

  • 20200115_185450[1].jpg
    20200115_185450[1].jpg
    279.7 KB · Views: 252
Sorry maybe I was not clear.
I had oil leak at the rear diff pinion seal so I decided to change. For this I have ordered flange kit and already changed seal and put a new flange on. The original centralising ping looked good and I put it back.
As I had to remove rear prop I also decided to renew the rubber coupling so I have ordered a kit including spigot.
What I do not understand why my spigot (which is in the prop) has a metal insert while the new GKN one does not? Maybe I have a different prop already changed by previous owner? I do not want to remove (chisel out) the original one until I am not sure the new one will fit.
 
You must log in or register to reply here.

Similar threads

B
3 bolt flange Diff
Replies
1
Views
362
miktdish
miktdish
E
Disco 2 Fuel Leak
Replies
1
Views
240
Landmark2
Landmark2
G
National Windscreens is hopeless
Replies
5
Views
398
Gingerbread
G
9
300TDI Doughnut
Replies
9
Views
860
9255 steve
9
PopPops
Disco 2 TD5 Mahle oil filter
Replies
4
Views
420
PopPops
PopPops
Back
Top