Rear heated switch( panel land rover discovery 3)

LR-hobbs said:

Hello again,

I recently fitted the front and rear heated seat panels to my discovery 3 for preparation of a heated seat conversion the fronts light up but the rear doesn't , I've checked the fuses for both and swapped them over still no results.

Wiring does exist for the rear as I found the seat wiring stuffed in the wheel arch

Click to expand...

Graculus said:

Heated rear seats on L319 do not need coding, the switches connect directly to the control modules that mount under the rear seat bases. Check you have ignition-switched power on the l.green/white wire.
The switches will not illuminate (except for background illumination) if the module is not connected, nor if there is a fault with one of the seat heating pads.

Click to expand...

Graculus said:

Yes.

Click to expand...