rear half shafts 200/300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RustyDefender

Well-Known Member
Posts
463
Location
Lake District
Hey,

Is it possible to get rid of these types of half shafts in the rear and place individual spline only shafts in with the terrafirma drive flange shafts:
1695919251166.png
 
If you measure the half shafts and make sure they are long enough why not...
Just make sure they have the same amount of splines and match up.
 
Hey,

Is it possible to get rid of these types of half shafts in the rear and place individual spline only shafts in with the terrafirma drive flange shafts:
View attachment 298897

Yes mate I have a full set of raptor hd shafts with hd flanges. I do have a full spare set of hd shafts the rears are in my shed
the fronts are still in a another landy.
 
Yes mate I have a full set of raptor hd shafts with hd flanges. I do have a full spare set of hd shafts the rears are in my shed
the fronts are still in a another landy.
Are these the ones mate? https://www.ebay.co.uk/itm/351911053811

I guess it's just a case of switching these out and then throwing them in right, do I need to add any circlips? Looks like could store these much easier also incase of emergencies
 
Are these the ones mate? https://www.ebay.co.uk/itm/351911053811

I guess it's just a case of switching these out and then throwing them in right, do I need to add any circlips? Looks like could store these much easier also incase of emergencies

Ive had a look mate im not sure if id trust ebay for these, looks like raptor have stopped trading in the uk ??
If I was buying new again id be buying Ashcoft Transmissions shafts as they will honour the warranty. Doubt an ebay seller will.
Yes you will need circlips & fit new bolts & gaskets with the flanges. :)

Terrafirma do shafts too.
 
Cheers mate, got the full Terrafirma thing going on so i'll give them a phone and get a part number! They're good like that on the phone talk you through everything! I ordered a set of the 4 flanges.. turns out i can only fit 2 of them due to this! so upgrade it is!
 
Back
Top