rear half shafts 200/300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RustyDefender

RustyDefender

Well-Known Member
Posts
568
Location
Lake District
Hey,

Is it possible to get rid of these types of half shafts in the rear and place individual spline only shafts in with the terrafirma drive flange shafts:
1695919251166.png
 
If you measure the half shafts and make sure they are long enough why not...
Just make sure they have the same amount of splines and match up.
 
RustyDefender said:
Hey,

Is it possible to get rid of these types of half shafts in the rear and place individual spline only shafts in with the terrafirma drive flange shafts:
View attachment 298897
Click to expand...

Yes mate I have a full set of raptor hd shafts with hd flanges. I do have a full spare set of hd shafts the rears are in my shed
the fronts are still in a another landy.
 
kevstar said:
Yes mate I have a full set of raptor hd shafts with hd flanges. I do have a full spare set of hd shafts the rears are in my shed
the fronts are still in a another landy.
Click to expand...
Are these the ones mate? https://www.ebay.co.uk/itm/351911053811

I guess it's just a case of switching these out and then throwing them in right, do I need to add any circlips? Looks like could store these much easier also incase of emergencies
 
RustyDefender said:
Are these the ones mate? https://www.ebay.co.uk/itm/351911053811

I guess it's just a case of switching these out and then throwing them in right, do I need to add any circlips? Looks like could store these much easier also incase of emergencies
Click to expand...

Ive had a look mate im not sure if id trust ebay for these, looks like raptor have stopped trading in the uk ??
If I was buying new again id be buying Ashcoft Transmissions shafts as they will honour the warranty. Doubt an ebay seller will.
Yes you will need circlips & fit new bolts & gaskets with the flanges. :)

Terrafirma do shafts too.
 
Cheers mate, got the full Terrafirma thing going on so i'll give them a phone and get a part number! They're good like that on the phone talk you through everything! I ordered a set of the 4 flanges.. turns out i can only fit 2 of them due to this! so upgrade it is!
 
You must log in or register to reply here.

Similar threads

B
rear axle
Replies
0
Views
320
bosun
B
julianf
Half shaft oil seal removal ?
Replies
6
Views
457
miktdish
miktdish
M
How far to push half shafts into diff?
Replies
2
Views
320
mcbrl
M
J
TD5 defender Vibration
Replies
3
Views
550
chrisstdt
chrisstdt
julianf
Loads of slack in power train - diffs?
Replies
15
Views
849
julianf
julianf
Back
Top