rear end clunk pt 2

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

scotia900

New Member
Posts
75
Location
Indre France
Had a rear end clunk and replaced A frame bearing and bushings as advised, sounds like the rear end clunk has gone but I now have a sort of clink coming from gearbox or transfer box? the gearbox seems to rattle first thing from cold then stops after a few miles, all the gears are good no problems? any ideas please, 1990 defender 19j motor etc,
 
changing gear 1st, 2nd, 3rd only, but if i do slow gear changes it doesn't make the noise, on hills because of the power i have to do quick changes and it clinks, new prop uj's no play anywhere,
 
Input gear she probably be-as said in link whip off ya pto cover on tranny box and check state of your gearbox output shaft/transfer input gear..
Johnys link is quite comprehensive on what to check.
Although my noise was from brackets bolting a-frame to chassis. I too had put new bushes and bearings but the new bolts were Shanked and the nut bottomed out before tightening plates to chassis hence my little clink. Worth checking tightness of all bits ya can see..and maybe inspecting splints in your prop for wear :)
 
You must log in or register to reply here.

Similar threads

B
Rear rattle/ clunking
Replies
4
Views
362
Anaconda
A
M
Loud clunk from rear SOLVED
Replies
8
Views
1K
martin41076
M
MrGorsky
P38A Rattle when in gear and foot on brake...(SOLVED)
2
Replies
22
Views
3K
Flossie
Flossie
L
Grinding noise coming from gearbox area
Replies
6
Views
2K
robbie the greatl
robbie the greatl
I
L322 Could anyone help with 2005 RR HSE fluids questions?
Replies
0
Views
641
invisible999
I
Back
Top