Rear door seals

Pozza · Nov 1, 2013

My Range Rover keeps catching water in the bottom edge of the rear door frame holding it on the inside edge of the sill meaning when I open the rear door after rain I get a cup full of water spilling out.
Not sure if it's a design fault or I have a default with seals on the doors. Think it's a design issue because both doors do it.
Any advice on fix etc would be greatly appreciated.

Saint.V8 · Nov 1, 2013

Design Issue - mine does it, lots of reports about it too....solution I seem to remember was replacement seals or door alignment...but I could be wrong on that!

Pozza · Nov 3, 2013

Ok cheers will talk to dealership see if they have any replacement seals with issue resolved.

wil2813 · Nov 3, 2013

+1 mine also does it but only on the o/s/r door

busakaz · Nov 3, 2013

Datatek · Nov 4, 2013

L322's are sooo much better than a P38, engineered with even more leaks

donp38 · Nov 4, 2013

mine does it too....design issue I think....
what do you expect, it still has Solihull logic....

don't worry and carry on...

Rear door seals

Pozza

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Pozza

Member

wil2813

Well-Known Member

busakaz

Active Member

Datatek

Well-Known Member

donp38

Well-Known Member

Similar threads