Rear door, lower trim part# (pics)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

GreenLove

New Member
Posts
430
Location
Carmarthenshire, South Wales
Looking for a rear door lower trim for a 110 hardtop (1992).

Anyone happen know the part number for the trim on the right?

rear_door_lower_seal.jpg


Thanks
 
Checked Microcat - there is only one part given for the seal (ALR4770) and you have already found it. There are no replacements or alternatives. Can only assume someone put something else in there before.
Sorry can't help any further
 
Yep, coming up with ALR4770 as well - instinct says buy it and it'll fit just fine.

Alternatively if you want to match to what you have already, try a firm like this to see what they can do:

Seals

Looks similar to their part 138, but can't promise it's an exact match
 
Checked Microcat - there is only one part given for the seal (ALR4770) and you have already found it.

Yep, coming up with ALR4770 as well - instinct says buy it and it'll fit just fine.

Dealer says that part ALR4770 has been superceded by a new design, but has retained the same part number.

Got ALR4770 here, but it doesn't fit the old trim. So, rather than buying just the rubber trim (£7) you now have to buy the newly designed metal trim to fit the newly designed rubber trim, which comes in at around £35!

Using a Stanley knife I've cut off the excess rubber, used a blowtorch to bend the rubber to the same shape as the old and made it fit the old trim.

Land Rover ignoring the little people it seems.
 
Back
Top