first of all I have an odd disco1 300tdi, it is a 3 door registered in 2000 put together in 1999 in Solihull from the info I found on the vin plate, now then rear pads (mintex) fitted seem to be slipping down through the callipers and wearing a groove in the disc, any input would be good, thanks
rear brake problem disco1
- Thread starter perspexy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
new calipers
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Yup, mine did the same. A different caliper cured it.
DiscoPol
Well-Known Member
- Posts
- 6,376
- Location
- The Land of Po
+3
Matt Baxter
Active Member
- Posts
- 551
- Location
- Fleet,welding up a disco
Make sure the spring/fitting kit is fitted the right way round first
Similar threads
