Rear Brake Pipe - 90 1988

Hi,
Can anyone guide me where i could buy a rear n/s brake pipe for the above? Managed to shear mine replacing the brakes.
Thanks.

Buy pipe and fittings from a motor factors and make one up, dead easy!

You can get a kit to flair the pipe ends for little money,easy to use and well worth having.

Or take it to your local garage and ask themto copy it, mine was a fiver. I did the bending myself.

Or ask in the freelander forum for a bender...

pete1987RRC said:

Or ask in the freelander forum for a bender...

Click to expand...

...and wait for the rush!

wattfield said:

...and wait for the rush!

Click to expand...

Damned cheek. I have a Fender and a Freelander, so I must be bi then...

Anyway, just buy a roll of copper brake pipe, some unions and a flaring kit. Look up OP1 and OP2 flares online or read the instructions in the kit. Make your own brake pipe.

You'll have lots of stuff left over but I find if one brake pipe's gone, the others are sure to follow.

Thanks for all your advice. Had a local make some up and then bent it myself. Will get a kit next time and have a go.
Thanks again.

GiggsyV8 said:

Thanks for all your advice. Had a local make some up and then bent it myself. Will get a kit next time and have a go.
Thanks again.

Click to expand...

That's what we're here for ... To help, advise and take the ****!