Re-Coring A Radiator

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
paddy700d

paddy700d

Active Member
Posts
293
Location
Deeside/Cairngorms/Beneath a Land Rover
While doing my 200Tdi conversion I've noticed that both the radiator and intercooler the fins inbetween are a bit crumbly. The rad and intercooler both work fine (not burst) but are fragile. Would it be worth getting the fins redone or just leave well enough alone?
 
My rad was in a similar state when I did mine. I just renewed it as the costs are similar to recore. After putting all that hard work into your engine, you don't want to cook it. My intercooler was in good nick, so I retained the old one.
 
I re-cored the one for my 300tdi, cost £150 (bit more than a cheap replacement rad). I think I have a better quality item as it is a proper 'copper' re-core (rather than aluminium) and still uses the metal end caps rather than plastic ones so should last longer in the long run.
 
I had radiators re-cored in the past but when I needed a new 300TDi radiator I enquired at my local place and they said it just wasn't cost effective in my case so I bought a Bearmach copper / brass one instead. Quality was spot on and it has been fine.
You CAN buy the alloy / plastic ones but for another 30% you can buy one to OE spec.
 
Litch said:
I bought a Bearmach copper / brass one instead. Quality was spot on and it has been fine.
You CAN buy the alloy / plastic ones but for another 30% you can buy one to OE spec.
Click to expand...

Annuver +1 for the Bearmach HD one;);), if I'm honest I can't remember where I got it from:confused:, but this price rings a bell:rolleyes::rolleyes:;);)
Radiator 300Tdi Metal (Bearmach) BTP2275 BEARMACH BEARMACH Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.
 
No, standard one I think (certainly identical to the genuine one I removed).

Turned out my original rad (which was only about 4-years old at the time) was still perfect and the fault was to be found elsewhere but I left the Bearmach rad in place as the quality was well up to the spec of the original one. If I had thought it was of lesser quality I would have removed it and re-fitted the original.
 
You must log in or register to reply here.

Similar threads

Almonds
Help Request: 300TDI Overheating Mystery / Poss Bleed Hose?
Replies
2
Views
369
D1Nut
D1Nut
mjr92
Sluggish 200tdi
Replies
6
Views
1K
mjr92
mjr92
Blob
L322 ABS Re-learn Procedure? Is there such a thing?
Replies
5
Views
458
Blob
Blob
W
200 Tdi crank damper mount shot - what to do
2
Replies
38
Views
2K
wileycat
W
Mad McNiff
05 RR Sport Cooling and purpose of mystery connections.
Replies
3
Views
892
Graculus
Graculus
Back
Top