rattle on front suspension
- Thread starter RENRUT
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Ed Foster
New Member
- Posts
- 121
- Location
- Oxfordshire, UK
Are you sure its the suspension, have you checked exhaust mounts or heat shields????
Tatooboo
New Member
- Posts
- 873
- Location
- I live in the Girona area of Spain
Drop links and anti roll bar bushes...
I changed mine last year made a big difference, also check that you dont have any loose screws or bolts on the front end of the body work...had that problem as well.
Hope this helps.
D
I changed mine last year made a big difference, also check that you dont have any loose screws or bolts on the front end of the body work...had that problem as well.
Hope this helps.
D
Tatooboo
New Member
- Posts
- 873
- Location
- I live in the Girona area of Spain
Oh btw they seemed ok when the car was jacked up , not to much movement but when i had the new ones hell of a difference in the tension on them.
Was worse with me going over speed bumps.
D
Was worse with me going over speed bumps.
D
Ed Foster
New Member
- Posts
- 121
- Location
- Oxfordshire, UK
How long ago did the rattle start?
- Posts
- 83,232
- Location
- Embasinga stocæ
at 21:10 - so about 18 minutes ago!
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
snigger
Tatooboo
New Member
- Posts
- 873
- Location
- I live in the Girona area of Spain
Just buy the full drop link they are not expensive.10/15 quid a side and i did the bushes on the anti roll bar at the same time i think they are 4/6 quid each..not exactly sure as my dad brought them over for me.
But its not a big job.
D
Northern Irelander
Well-Known Member
- Posts
- 2,890
- Location
- N. Ireland
Yep drop links, sounds like a mini drum kit in the front, you also get a big thump when the front wheel 'steps off' high kerbs and dead police men (speed ramps)
sparkyjohn5
New Member
- Posts
- 203
Make sure ANTI-ROLL BAR is centralised in mountings and outer bends are about 1 inch away from lower end of shock strut, mine dented the o/s bottom end of the strut as the anti-roll bar had moved over and exposed 1 inch of shiny black roll bar paint.
