Rangie Classic - Bottom door pillar repairs.

Right, I've finally got around to doing the sills on the Drivers side now.
I've removed the old and placed the new ready for welding up tomorrow.
Hardest bit was the blasted chassis to body bolts and also the running board
bolts which had rusted up a treat.

I've learn't my lesson from doing the passenger side and got all new bolts
in advance.

Only issue on this side is that the bottom of both door pillars are past
their best. With the Passenger side which I did last October / November I
got a door pillar repair from paddocks but didn't realise until I got it
that the one they listed was only for the 3 door not th2 5 door. Anyway I
chopped and spliced it until it fitted and made a nice repair of the
effected area.

This time I'd like to get repair section for both the front pillar and the b
pillar for the 5 door. Does any one know anyone that lists them?

Lee D

--

www.lrproject.com

Workshop photos from Landrover repairs
& other such tinkerings.
Home of Percy the Jag powered Landrover

"Lee_D" <[email protected]> wrote in message
news:[email protected]...

> This time I'd like to get repair section for both the front pillar and the
> b pillar for the 5 door. Does any one know anyone that lists them?

Never found any, fabricated my own being the weekend and all that.

Lee D