m1lsd
New Member
- Posts
- 11
- Location
- stoke on trent
anyone know where i can get a obd 11 plug with a usb connector on to go into my laptop
range rover l322 obd plug
- Thread starter m1lsd
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,310
- Location
- Embasinga stocæ
Yu can't. They use different protocols. I can supply yu the cable, but you will need a USB to serial converter.
m1lsd
New Member
- Posts
- 11
- Location
- stoke on trent
oK how much and how quick is delivery
- Posts
- 83,310
- Location
- Embasinga stocæ
Is this for the EAS software or a BBS package?
wot year is yo motor?
wot year is yo motor?
Last edited:
Datatek
Well-Known Member
- Posts
- 45,815
- Location
- Near Poitiers SW France
In case you have not noticed, he's talking about an L322 not a P38. The L322 is CAN BUS and totaly different to the P38. Forget serial to USB converters, not relevant. His best bet is Storey Wilsons new kit which has the hardware interface for CAN BUS to USB.
- Posts
- 83,310
- Location
- Embasinga stocæ
thanks DT - shows wot i know about Rangies 
. Cables yes, Rangies no.
My understanding is that for BBS products - An L322 between 2002 & 2005 uses the BBS "Black" lead.... tiz only after 2005 that it becomes CANBUS
Not sure about the faultmate.
. Cables yes, Rangies no.My understanding is that for BBS products - An L322 between 2002 & 2005 uses the BBS "Black" lead.... tiz only after 2005 that it becomes CANBUS
Not sure about the faultmate.
Last edited:
Datatek
Well-Known Member
- Posts
- 45,815
- Location
- Near Poitiers SW France
thanks DT - shows wot i know about Rangies
My understanding is that for BBS products - An L322 between 2002 & 2005 uses the BBS "Black" lead.... tiz only after 2005 that it becomes CANBUS
Not sure about the faultmate.
Not sure of the dates, Matt Stevenson would know, but there are changes as the years go by, I do know that the comms are totaly different to the P38 and a hardware interface is required. BBS do the kit but it's pricey for the L322 I think. Storey Wilson is the cheapest, if untried option.
