Radius Help !!

currymunster · Jul 26, 2012

I've managed to mash the thread on the big m20 thread on my F/N/S radius arm!!!

Does anyone know if the thread is part of the arm? Will I have to change the whole arm???

Robbo5833 · Jul 26, 2012

10 out of 10 for effort! Will it not clean up with a file?

currymunster · Jul 26, 2012

Robbo5833 said:
10 out of 10 for effort! Will it not clean up with a file?

Tried that to no avail - When I took off it unscrewed till the stud bit was just clear of the nylock bit - then just round and round stripping the thread untill I realised Wow I've turning this for a while it must be nearly threre?
Alas no - out came the pry bar same time as unscrewing -
Result _ stripped thread !!!!!!!!!

jamesmartin · Jul 26, 2012

another arm ,usually nut goes

currymunster · Jul 27, 2012

jamesmartin said:
another arm ,usually nut goes

Thanks James,
My nut has all the studs thread in it. When I put it on it for the MOT it went so far and no further so I gave up an crossed my fingers for MOT. Ordered new Nut and hoped for the best!!!

Any one got a radius arm near kent going??????????

Robbo5833 · Jul 27, 2012

I've got one in Peterborough

Radius Help !!

currymunster

Well-Known Member

Robbo5833

New Member

currymunster

Well-Known Member

jamesmartin

Well-Known Member

currymunster

Well-Known Member

Robbo5833

New Member

Similar threads