Radius arm bolts?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ONE LIFE LIVE IT. D90

ONE LIFE LIVE IT. D90

Active Member
Posts
953
I forgot to bl**dy order new bolts when i ordered my new bushes.

Notice the local agricultural shop stocks the sizes needed. Although im not sure of the quality of the bolts, they are shiny though.

Will these be alright?
 
Depends how shiny. If you can see a vague reflection of yourself then yes. If they have a mirror polish then they have a tensile strength of 12 ton :rolleyes:

Just have a look at the tensile strength and judge for yourself. They're hardly going to be made of tinfoil
 
You want nylock nuts. They usually have letters forged\stamped in them to show grade
I'll b home in a few days and could check, but someone else will tell you before then.
 
Cheers fellas. I never trust the tensile of bolts recently. Nothing seems to be made to last like the old days. The bolt heads usually say 8.8 grade, how true that is i dont know
 
The original bolts are 8.8 grade. Surely the bolts from an argicultural supply shop are going to be as good as the likes of britpart etc
 
This is what I've got and these are correct radius arm bolts
a9ydarem.jpg
 
Cheers guys. Went to my aggricultural supplier. The bolts i picked up state CW and 8.8 ok the head. They seem good quality. Or atleast as good as i would get from online atleast
 
ONE LIFE LIVE IT. D90 said:
Cheers guys. Went to my aggricultural supplier. The bolts i picked up state CW and 8.8 ok the head. They seem good quality. Or atleast as good as i would get from online atleast
Click to expand...

I get all mine from the local bolt shop, they're mostly 8.8 but the odd one I get is 10.9. A lot cheaper than anywhere else as well.
 
the_wolf said:
The three lines mean something but I can't remember what, I got these from work and they're the bolts land rover supply for our military fenders
Click to expand...

Good links.

So the three markings on the bolts this chap has are akin to the standard 8.8 bolt, which incidentally, is plenty man-enough.

My old flatmate from uni helped with speccing some bolts on a fancy flywheel on one of my old cars, and I recall him telling me about a steel rig they had made up in their engineering place - I forget the load it could carry (it was many tons) but the frame was suspended by 8.8 bolts, and only four of them at that.

An appropriately sized 8.8 bolt is very strong and there is rarely need for anything greater from what I've read.

Tom
 
Hi, yes the pictures do show the tensile strength, that's what the 3 lines are.... its American or Japanese. if you do use aftermarket bolts make sure that the Shoulder (Un treaded Portion) is of sufficient length) and f you opt for the 10.9 (High clamping force) that you use nuts and washers to suit... phil
 
You must log in or register to reply here.

Similar threads

S
Disco 1 Radius arm bush replacement
Replies
16
Views
3K
PaulJM
P
H
MOT Failed
Replies
3
Views
2K
Datatek
Datatek
P
New front radius arm bushes - recommendations?
2
Replies
21
Views
3K
Dr Strangeglove
D
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
1K
miktdish
miktdish
L
Steering Evolution
Replies
11
Views
2K
lasher99
L
Back
Top