Radio code p38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Nutty 371

Member
Posts
13
Location
Plympon
Hi just registered I had to disconnect battery on my range rover p38 51 52 reg I tried putting code in and it just says wait been like this for ages any got and ideas apart from New radio thanks
 
Welcome.
Have had this a long time ago so memory is a bit vague.
It sounds that you haven’t got the correct number?
Has the unit been changed (not the sort of thing you would ask when you buy) each unit has its own number.

If I can drag out what I did :oops:,
Each unit has a number and you can get number online, couple of £s. You need serial number of the unit.

I also see Data is on the job so your in good hands.:)

Good luck
J
 
Welcome.
Have had this a long time ago so memory is a bit vague.
It sounds that you haven’t got the correct number?
Has the unit been changed (not the sort of thing you would ask when you buy) each unit has its own number.

If I can drag out what I did :oops:,
Each unit has a number and you can get number online, couple of £s. You need serial number of the unit.

I also see Data is on the job so your in good hands.:)

Good luck
J
All help grateful received
 
Phone your nearest dealer tomorrow. Give them your registration and they will have the code. You may have to go in with log book. Or if lucky, theyll give you it over the phone.

P.s might be handy to know if you have a 51 or 52 on your plate :rolleyes:
 
Ok thanks will find out

It's been like it about a month lol
Then it's fu##ed 41GH2D+fYzL._SY355_.jpg

This any good to you if a clarion? https://www.clarion.com/us/en/support/product_manuals/2012/NextGate/Troubleshooting/index.html

Not that exact page but the main vlarion site
 
The "Wait" increases the more times you get it wrong I think, but sitting there for a month suggests its fubar'ed.
if its the original radio as fitted by the factory then LR dealer can confirm the radio-code.
 
Back
Top