Radio Code Input

Hi, i was looking though the internet for info regarding how to put the code in to the stereo, when i stumbled across this most fantastic site.
I,ve now been on here an hour just reading the past treads on any thing to do with range rovers, and what a excellent reference tool.
unfortunately the reason i stated looking is for the radio code input sequence for a range rover 4.6 hse 2000 model with cdchanger as i have no manual for it. Any help would be useful, thanks
LAW632

lmao you could of at least posted the website you were looking at!

nice 1 bigstoo , anyway i,ve worked it out now.
turn on the radio (on this model the stereo says range rover, then wait, and then it says code).
it is now ready for the code
press 1 once, then use the tuning arrow button until you reach the first number of your code.
once you have found this number press 1 again and it stores the first number and then you repeat above until all the numbers are stored, and thats it.
if you get it wrong, just leave the radio on with the key in the second position until it says code again.
hope this helps someone in the future.