P38A radiator 3rd in ten years!

Mark Piercy

Well fumbled member....

Full Member

Posts

13,370

Location

Sud ouest France !

• Sep 25, 2016

• #1

Looking through my cars history and finding that the radiator has been changed every three years or so.. Only to find the intercooler is the culprit. It has been rubbing on the main rad and splitting the vains... Stupid mounting system has been allowing it to swing on the rubber mounts midway up and burst the rad every time. The last owner not being mechanically minded has just paid out continuously for a new rad. Anyone else found this?

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Posts

19,859

Location

Buckinghamshire, UK. ('95 DT)

• Sep 25, 2016

• #2

No. My intercooler is absolutely solid with no movement. Is yours not bolted?

 

ovalandrover

Well-Known Member

Posts

1,640

• Sep 25, 2016

• #3

I have an after market intercooler mounted below the oil cooler and found I had the same problem so I got a couple of 1inch aluminum strips and used silicon to stick them to the rad and then stuck some thin rubber to them it seem to work ok

 

Mark Piercy

Well fumbled member....

Full Member

Posts

13,370

Location

Sud ouest France !

• Sep 25, 2016

• #4

I dont know I its an original intercooler or aftermarket, the original owner had it tuned. It is bolted but only at the top of the intercooler??

 

Mark Piercy

Well fumbled member....

Full Member

Posts

13,370

Location

Sud ouest France !

• Jan 20, 2017

• #5

cured with cork and no nails. All dry after three months!