R380 gear box
- Thread starter Radds
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jonnyb1990
Well-Known Member
- Posts
- 2,013
- Location
- Gloucestershire
One is long stick the other is short stick,
Cant remember which one is which,
Think Long is Disco,
Either way use ATF dextron 3 over MTF94
Cant remember which one is which,
Think Long is Disco,
Either way use ATF dextron 3 over MTF94
- Posts
- 83,235
- Location
- Embasinga stocæ
gear levers and mounting.
Also clutch housing, I think.
Also clutch housing, I think.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Selector shaft and yolk, but both can be changed to suit spec. Or ashcroft do a yolk adapter so you can use defender top.
So I take the top (gear sticks) and the bell housing off of my defender box and fit it to a disco box, is it that simple?
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Not quite. The difference between the two is the selector shafts are different lengths, and the selector yolk is also different. As such the defender top housing will not bolt straight on top of a disco box.
So you have two options.
Change the selector shaft and yolk to defender spec. About £100 for both last time I checked, but isn't really a diy job as it's means stripping the gearbox.
Or buy the adapter yolk from Ashcroft I mentioned earlier. About £90, which just fits in nice and simple.
