I am about to plumb in my fuel system after the engine swap. I am doubting my own knowledge. Can someone please confirm that the top pipe on the fuel tank (110) is the pick up pipe in through the sender is the return. Don’t want to plumb them in the wrong way around at the engine end and because of the fire I could not label them.
Quick fuel tank plumbing confirmation required
- Thread starter dag019
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 17,312
The top pipe is the fuel return
Many thanks. Now plumbed in just need to see if the internet’s push rubber pipe over the plastic and hose clip actually works and seals.The top pipe is the fuel return
doriz
Well-Known Member
- Posts
- 17,312
I can’t remember exactly how mine went on but there wasn’t much up and down wiggle room when fitted
They were a tight fit so I am hoping it will be ok for the low pressure side.
