Quick and dumb question...
- Thread starter JerryXt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Yes it is.
Datatek
Well-Known Member
- Posts
- 44,077
- Location
- Near Poitiers SW France
It's also on your log book/Carte Gris
- Posts
- 58,170
- Location
- Preston Lancs.
Old 94 to 97. New 97 up.
excellent, thanks. Thought it was on the windscreen, but I dodn't want to blow good cash on the wrong parts by reading the wrong number.
Hadn't thought about the V5 tho, thanks DT.
BTW, the old girl is driving really well, no dramas. Very happy with her. Fixed an oil leak from the rocker box covers - bolts were hand-tight and the gaskets were stiff. Replaced the water pump and a/c condenser.
Wammers, mine's 97 with the Thor motor. I'm presuming that's 'new', but need the VIN to verify.
Hadn't thought about the V5 tho, thanks DT.
BTW, the old girl is driving really well, no dramas. Very happy with her. Fixed an oil leak from the rocker box covers - bolts were hand-tight and the gaskets were stiff. Replaced the water pump and a/c condenser.
Wammers, mine's 97 with the Thor motor. I'm presuming that's 'new', but need the VIN to verify.
- Posts
- 58,170
- Location
- Preston Lancs.
Should be the new interchangeable from side to side ones then. But best to check.
yes, thanks, they were the interchangeable parts.
The EAS has been largely behaving itself, but it occasionally freaks out, generally on very uneven road surfaces, or when the tyres are running at higher pressures. I'm going with the theory that the sensors are all over the place as :
Presuming this is a relatively simple fix, but I guess I'll need the 'blocks' for the suspension?
The EAS has been largely behaving itself, but it occasionally freaks out, generally on very uneven road surfaces, or when the tyres are running at higher pressures. I'm going with the theory that the sensors are all over the place as :
- they're original, as far as I can tell
- the EAS error is triggered most regularly when I travel over two bits of road that are almost corrugated while 'making progress' round a corner.
The airbags and compressors seem fine.
Presuming this is a relatively simple fix, but I guess I'll need the 'blocks' for the suspension?
- Posts
- 58,170
- Location
- Preston Lancs.
Don't need the blocks. If you have EASunlock use that and a tape measure. Bit of a fiddle but very doable.
JohnP38
Active Member
- Posts
- 619
- Location
- Alton Hampshire UK/Cape Town SA
- Posts
- 16,475
THOR has an inlet manifold that looks like a bunch of bananas...
GEMS has a Rectangular Box on top....
GEMS has a Rectangular Box on top....
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
It won't be a thor on a 97 reg.
