P38A PX door won't open

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
domino

domino

Well-Known Member
Posts
2,014
Location
Edinburgh
Hello all. It would seem my px door has somehow managed to superlock itself, or whatever Rod has become disconnected.

I had disconnected the battery a while back to strip the car. All doors were working fine. I'd go round them and lock them from the inside then use the key for the drivers door at the end of any work I was doing. Now, somehow, the door won't open from the inside or out no matter how many times I toggle the knob.

I haven't connected up the battery yet as I'm still sorting bits but the problem is, I can't easily get the carpet back to where it should be without the door open. It needs to love forwards (towards the car) a good few inches and try as I might, I can't get it to budge.

Any ideas how I can open the door without connecting the battery yet?
 
ah that will be a problem;).

All I can suggest is that you put everything back together on drivers side/center console, so you can then connect it all up, or you have to destroy the Pax door card:(

Does the BECM pulse a voltage on the "open side" or is it something silly and the power is supplied from the outstation +supply???????

J
 
marjon said:
ah that will be a problem;).

All I can suggest is that you put everything back together on drivers side/center console, so you can then connect it all up, or you have to destroy the Pax door card:(

Does the BECM pulse a voltage on the "open side" or is it something silly and the power is supplied from the outstation +supply???????

J
Click to expand...
Not actually sure to be honest, haven't gone that deep into it yet.
 
the door has superlocked and got jammed your gonna have to remove door panel remove motor off the latch and push the lever over to release it then you will need a replacement latch
 
You must log in or register to reply here.

Similar threads

I
P38 BeCM locked?
Replies
8
Views
887
pwood999
pwood999
Maat
P38A Door lock not working
Replies
3
Views
829
Maat
Maat
BunduRafiki
L322 Drivers door won't open from inside or outside
Replies
6
Views
1K
marjon
marjon
rangie1998
L322 Front doors deadlocked, do I have to break the locks?
Replies
1
Views
911
rangie1998
rangie1998
feyniriel
P38 alarm and immobilizer problems
2 3
Replies
42
Views
3K
Datatek
Datatek
Back
Top