heggars
Nec flectitur nec mutant
- Posts
- 502
- Location
- Dover, Kent
Right I'm going to be protecting the underneath of the Disco with either Hammerite, Waxoyl or both.
I would like to prep the frame as best as I can, so going to remove all the mud/dirt with a pressure washer- let it dry and then attack it with a wire brush/grinder..
But while looking for tools on Steel Bay, found a shop that sells grit to be used in a hand blaster, wouldn't this be a lot faster and maybe do a better job?
But what problems do you see with using one, would it be bad if you left some grit where you couldn't get it out.
And firstly would have to wrap all the UJ's and props, brakes etc etc..
I would like to prep the frame as best as I can, so going to remove all the mud/dirt with a pressure washer- let it dry and then attack it with a wire brush/grinder..
But while looking for tools on Steel Bay, found a shop that sells grit to be used in a hand blaster, wouldn't this be a lot faster and maybe do a better job?
But what problems do you see with using one, would it be bad if you left some grit where you couldn't get it out.
And firstly would have to wrap all the UJ's and props, brakes etc etc..