Propshafts - Which make

AlbertDefender90 · May 20, 2015

Hi all,

I need a set of props for my 90 as the balance of the old ones is questionable. What are the best brands to go for which are reasonably priced. Id prefer not to touch britpart for obvious reasons however they sell a hardy spicer prop. Are these any good?

Thanks

Albert

lynall · May 20, 2015

Ive got the britpart ones on my 90 and the series no troubles, I think you will find they are all okay.

mikescuba · May 20, 2015

AlbertDefender90 said:
Hi all,

I need a set of props for my 90 as the balance of the old ones is questionable. What are the best brands to go for which are reasonably priced. Id prefer not to touch britpart for obvious reasons however they sell a hardy spicer prop. Are these any good?

Thanks

Albert

I have Britpart ones also and no problem. I do have a vibration problem which I thought could have been something on the prop shafts. I disconnected the front one and drove it in diff lock to try and identify if it was the front , then did the same for the rear. Turns out if wasn't anything to do with propshafts.

mick the builder · May 20, 2015

+ 1.My britpart props have been fine and hardy spicer are one of the top manufactures of uni. joints.

AlbertDefender90 · May 20, 2015

Great thanks, looks like I'm ordering hardy spicers from Britpart then [emoji4]

Brown · May 21, 2015

Keep the old ones and put (decent brand) new bearings in them. Then you've got some fresh ones to put in as soon as there's any sign of any vibration.

AlbertDefender90 · May 21, 2015

Brown said:
Keep the old ones and put (decent brand) new bearings in them. Then you've got some fresh ones to put in as soon as there's any sign of any vibration.

Problem is I let the uj go too far on one so the yoke is buggered as well

Propshafts - Which make

AlbertDefender90

Active Member

lynall

Well-Known Member

mikescuba

Well-Known Member

mick the builder

Well-Known Member

AlbertDefender90

Active Member

Brown

Well-Known Member

AlbertDefender90

Active Member

Similar threads