Props haft doughnut issues

Hi
I have a 300 tdi disco and the doughnut which I replaced about a month ago is damaged again

Has anyone any ideas why this might be


Also I'm looking for a remote to suit same but with two programmed fobs anybody no were I can get one

Cheers

the donut is there to make the drive of a standard disco more 'pleasant'.
is your land rover lifted from standard as this can cause the donut to be a weak link when thrashing down a lane etc.
i got round it like many by fitting a 200tdi rear prop and changed the coupler on the diff to suit, bit of a #### of a job but worth it as your not going to kill rubber donuts every week.

Hi jim

No it's on standard springs they are stiffer than standard but nether the less standard height

Jim

Do u have any instructions on how to do this

Many thanks

My friend had the same problem with his discovery, his was down to a faulty input bearing which eventually failed locking the rear end up completely. Would recommend you check just incase.

Without starting up a Britpart debate. My old Disco 300 needed a new donut and the BP one lasted a few months before it cracked and was worse than the one I took off. So I got a genuine kit from the dealer. It came with new bolts and wasn't much more. It's a while ago now so can't remember prices but worth thinking about.