Prop shaft UJ,s

well the old uj seems to have all the holes in the right place,i must of trashed it when i fitted it.cant see any other reason it has failed.

I always use Bearmach, only had 2 fail out of about 36 -

I think they were badly drilled

Dippypud said:

I always use Bearmach, only had 2 fail out of about 36 -

I think they were badly drilled

Click to expand...

could be its just reproduction of a generic part so its probably quite a low standard.

anyone tried a QT front prop?
QT Land Rover Defender Front Carden Joint Prop Shaft - P1011 - Prop Shafts - Engine & Transmission - Land Rover Defender 90 - Qt Services

The Ferkin BoB said:

yep,i left the nipple out untill it was together,i also remembered to line up all the grease nipples.

il look at the old 1 in the daylight.

Click to expand...

Are you giving your old age away now....."basic principles of motor engineering" you'll be describing how a diff works next

I used bearmach, well made except two of the uj's had the nipples strip right out when detaching the grease gun, the threads on the nipples were made of chocolate i think.

livers said:

Are you giving your old age away now....."basic principles of motor engineering" you'll be describing how a diff works next

Click to expand...

you be suprised how many props that are a pain to grease

there are hd versions too.. dunno what they are like. Guy on ebay sells normal gkns for a tenner