Freelander 1 powerfold mirrors retrofit

P

PRO

Well-Known Member

Posts

637

Location

West Yorkshire

• Apr 27, 2020

• #1

Hello, I now have two freelanders.
One has PF mirrors and one not. I am planning to swap them over... which are the bits to take off?
Obviously the mirrors but not sure if wiring is there.

Thanks,
Paul

 

andyfreelandy

Well-Known Member

Posts

5,587

Location

Devon

• Apr 27, 2020

• #2

Hi, I did look at this but didn't finish the project! The wiring is there up to a point. The socket is present for the power fold controller behind the glove box.

The switch needs changing, not sure the plug is ready wired for power fold.

The door wiring looms are lacking 2 wires for the fold and will either need new cables from the door multiplug in the kick panel or change the door loom.

Obvs need the mirrors and controller too.

 

P

PRO

Well-Known Member

Posts

637

Location

West Yorkshire

• Apr 27, 2020

• #3

Right if it's not easy will ditch the idea only folded them once to check anyway
Thanks Andy

 

Nodge68

Well-Known Member

Posts

32,954

Location

Cornwall

• Apr 27, 2020

• #4

PRO said:

Right if it's not easy will ditch the idea only folded them once to check anyway
Thanks Andy

Click to expand...

It's not difficult to retrofit, if you have the donor vehicle already.

 

andyfreelandy

Well-Known Member

Posts

5,587

Location

Devon

• Apr 27, 2020

• #5

Nodge68 said:

It's not difficult to retrofit, if you have the donor vehicle already.

Click to expand...

Indeed, compared to changing cams it'll be a piece of whassisname!!